Ульяновский областной

Центр трансфера технологий

Отправить на печать
Разработка технологии изготовления гибкой токопроводящей пленки

Номер профиля: ТЗ-107
Аннотация запроса
A Spanish Research Centre in the shoes and leather sector seeks a technology to manufacture a flexible conductive film for measuring/monitoring sole pressures, both in an insole and on a platform. The produced film must fulfil some specific technical requirements regarding to thickness, withstood pressure, resistances and load surface. The centre is looking for a license agreement or a technical cooperation as well as other types of cooperation.
Описание запроса
The Spanish Research Centre is a service organisation established in 1971 which develops a series of scientific and technical activities of great interest to the Spanish footwear industries. This Research Centre takes care of the innovation which affects footwear and related industries globally: the evolution in knowledge about materials and production processes, the development of their own tools such as computer design programmes, modelling methods, techniques for measuring and testing, exploration, implementation and introduction of technologies alternative to the traditional processes, adaptation of the technologies developed for other sectors, new raw materials or improvements on the traditional ones, pollution and recycling of waste, etc.

For carrying out these activities, a network of laboratories was created, covering the main geographical areas where the footwear and related industries are located in Spain.

Pressure measurement systems based on resistive sensors enable simpler use and lower electronic consumption. Nowadays, there are some sensors available on the market but they do not meet all the specifications required. In particular, we would need different types of conductive films in order to produce our own sensors.

The requested technology will be mainly used for the manufacture of pressure sensors aimed at monitoring foot plantar pressure inside the shoe.
Технические спецификации/Особые технические требования запроса
Main technical specifications required are:

• Maximum thickness of the film: 0.5 mm
• Pressure exerted on the film: From 0 to 700 KPa
• Minimum resistance at maximum load (700 KPa): 10 KOhm
• Resistance variation with a load between 700 and 100 KPa: At least 100 KOhm
• Loaded surface: Smaller than 1 cm2
• Pressure/resistance relationship: Shall be kept constant in a temperature range between 20 ºC and 50 ºC, also under different humidity conditions
• Time drift in 10 min continuous load shall be negligible (<3%) and the pressure/resistance relationship shall be reset to initial values in less than 1 min in unloaded conditions
• No significant time drift in intermittent loads for several hours.
Технологические ключевые слова
Электронные измерительные системы
Сенсорные технологии, связанные с измерениями
Датчики внешней среды и биометрические датчики, приводы
Цифровые системы, цифровое представление данных
Автоматизация, робототехника, системы управления
Краткие коды рыночных применений
Информационные технологии
  • Электроника, микроэлектроника
  • Обработка информации, информационные системы
Измерения и стандарты
  • Методы измерений
Рыночные применения
The current domain of application is: Pressure sensor for measuring/monitoring sole pressures, both in an insole and on a platform.

Other future applications: Whatever application requiring a measurement of the pressures between two surfaces in a range similar to the one previously mentioned: Real-time robot control (eg. pressure control in artificial hands), dorsal pressure in the shoe, pressure-sensing blankets, various electronic controls, etc.
Тип требующегося сотрудничества
  • Техническая кооперация
  • Лицензионное соглашение
Предпочитаемые страны
Данные отсутствуют
Тип искомого партнера
Industrial, Research Centre, University...
Область деятельности партнера
Mainly microelectronics, engineering
Задачи, стоящие перед партнером
Development or adaptation of the technology
Дополнительная информация
The Research Centre is looking for a company producing or offering the technology required to manufacture the flexible conductive film.
  • Исследовательский институт /Университет
Размер организации / фирмы
  • < 10 сотрудников
Дата публикации: 2009-09-25 | Вернуться

Copyright © 2007–2008 ГОУ ВПО Ульяновский государственный технический университет,
Ульяновский областной Центр трансфера технологий

По всем вопросам обращайтесь ctt@ulstu.ru