Ульяновский областной

Центр трансфера технологий

Отправить на печать
Микро-генератор тепла и электроэнергии (CHP) с мотором Стирлинга
Номер профиля: ТП-103
ОБЩЕЕ ОПИСАНИЕ
Аннотация предложения
A German company has developed a Micro-Combined Heat and Power unit (Micro-CHP) run by a novel 4-cycle-Stirling-motor. The Micro-CHP is appropriate for energy/heat-production tailored to the consumption needs of single family houses or small businesses. The company is strongly interested in licensee partnerships for manufacturing and distribution, especially in partners of the motor industry (S, GB, I, D, USA, RU). EPA, German and international patents are applied for and partially granted.
Описание предложения
The German company is based in the capital region Berlin-Brandenburg and specialized in the development of hot gas engines based on the ERICSSON principle. In this field, the company provides a high level of expertise and holds numerous national and international patents.

The Micro-CHP is based on an innovative principle: It contains a novel 4-cycle-STIRLING-motor with two double-piston-entities. These four integrated STIRLING-processes lead to a homogenous combustion energy transfer at the generator shaft. Thus, it is much more efficient than conventional STIRLING-motors. Compared to STIRLING-engines, the ERICSSON thermo-dynamic cyclic process provides a far higher shuttle and thermal conduction performance.

Conventional STIRLING-engines are based on a rather complicated heating system. On the contrary, the Micro-CHP is based on a simple single pipe heater. The heater/boiler head can be replaced easily and thus, adapted to different combustibles. The motor can cope with different types of combustibles such as natural gas, vegetable oil or pellets.

Moreover, the generator casing is rather compact and small, and through its particular and compact construction the engine is easy to set up. Also, the engine is exceptionally quiet, easy to maintain and long-lasting.

For the development of the Micro-CHP, eight years of research and development work have been invested.

The machine is already field tested and now ready to go into mass production and for market distribution.
Инновационные аспекты предложения
- Improvement of the thermo-dynamic cyclic process (ERICSSON) of all four cycles of the motor via novel type of construction with two double-piston-entities;
- Low loss of shuttle- and thermal conduction, much higher energy efficiency output;
- Small load on crankshaft at concurrently homogenous engine operation;
- Boiler/Heater can easily be replaced and thus, a wide range of traditional and renewable combustibles could be used, either coal, gas or biomass;
- The Micro-CHP is specifically tailored to the needs of single family houses or small business plants for heat/power-production;
- The engine provides a high mass market potential;
- The engine is extremely compact and easy to handle, it requires only small maintenance efforts.
Главные преимущества предложения
Данные отсутствуют
Технологические ключевые слова
Жидкое ископаемое топливо
Твердое ископаемое топливо
Газообразное ископаемое топливо
Турбины, трубопроводная техника, поршневые моторы, теплоэнергетика
Генераторы, электромоторы и силовые преобразователи
Текущая стадия развития
  • Стадия разработки (НИР)
Дополнительная информация
  • Potential partners can acquire a territory protection for manufacturing/engine construction and distribution
Права интеллектуальной собственности
  • Подана заявка на патент
Комментарии
Даты и номера имеющихся патентов
Данные отсутствуют
РЫНОЧНЫЕ ПРИМЕНЕНИЯ
Краткие коды рыночных применений
Промышленность
  • Промышленное производство
Энергетика
  • Энергетика
Окружающая среда
  • Защита окружающей среды
Рыночные применения
The MINI-CHP has a high mass market potential since it is particularly tailored to the heat/power-consumption needs of single family houses and small business plants.
СОТРУДНИЧЕСТВО
Тип требующегося сотрудничества
  • Техническая кооперация
  • Лицензионное соглашение
Предпочитаемые страны
Данные отсутствуют
КОММЕНТАРИИ
Тип искомого партнера
Partners in the motor manufacturing industries as licensees for production/distribution, e.g. Russia: Lada. Moreover, partners with expertise in engine manufacturing, motor, boiler or burner construction.
Область деятельности партнера
Mechanical engineering and motor, boiler or burner construction and distribution
Задачи, стоящие перед партнером
Mass/serial production of Motors/STERLING-Motors; distritution.
Дополнительная информация
Данные отсутствуют
ИНФОРМАЦИЯ ОБ ОРГАНИЗАЦИИ/ФИРМЕ
Тип
  • Исследовательский институт /Университет
Размер организации / фирмы
  • < 10 сотрудников
Дата публикации: 2009-09-25 | Вернуться

Copyright © 2007–2008 ГОУ ВПО Ульяновский государственный технический университет,
Ульяновский областной Центр трансфера технологий

По всем вопросам обращайтесь ctt@ulstu.ru